8 inch Kona Post Hot-Dipped Galvanized Steel Receptacle

It's strong!

In Stock

This 8 inch Kona Post Hot-Dipped Galvanized Steel Receptacle is needed to install the Kona Post. It is installed with an epoxy kit, which is sold separately from the Kona Post.

Once installed, the Kona Post simply inserts into the galvanized steel receptacle, which is installed below the ground.

The Kona Post receptacle measures 8 inches tall. Install by drilling 1.75 inch diameter x 8.25 inch deep hole for each receptacle. Use compressed air to blow hole free of debris.

Mix epoxy and apply to outside of receptacle and underside of top plate. Insert receptacle into ground and press down until you see epoxy coming out from under top plate. The epoxy needs to cure approximately one hour before the Kona Post is ready to be inserted into receptacle.

More Information

Products FAQS

Ask a Question

Ask a Question

  • There are currently no questions for this product. If you would like to submit a question, click "Ask A Question" or for immediate assistance you can chat or Contact Us