24" x 7" Diameter Gorilla Post Magnetic Bollard with Reflective Stripes

Available in 10 different sleeve colors.

In Stock

A little reminiscent of R2 D2, small and functional, our 24-inch Gorilla Post™ Bollard Mini with reflective stripes uses rare earth neodymium magnets to lock onto an epoxied metal base plate with a magnetic pull of 380 psi. This allows the post to be deployed in exactly the same position every time. The 24-inch tall, 7-inch diameter Mini is the sturdy choice over conventional traffic cones. The Mini is perfect for applications when traffic cones or markers must be repeatedly deployed in accurate and consistent arrangements. Unlike traditional traffic cones, the Mini is tamper resistant and stays securely in place until you remove it with the ergonomic removal tool.

Installation is simple. There's no need to drill large holes to compromise the facility surface that will require special tools and costly labor, the mounting plate is simply epoxied to the concrete surface.

We have two options for our removal tool, the Gorilla Post Puller or the Gorilla Post Puller Jr., they easily disconnect the industrial-strength magnet base and bollard combination, leaving only the permanent ADA-compliant mounting plate.

Overall height of bollard is 24 inches tall.

Read more about the 24" x 7" Diameter Gorilla Post Magnetic Bollard with Reflective Stripes.

You can review the Gorilla Post Features at the side-by-side  Gorilla Post Comparison chart.

The complete Gorilla Post product line is available at GorillaPost.com.

Products FAQS

Ask a Question

Ask a Question

  • What is a Magnetic Gorilla Post?
    Question by: admin on 2018-02-09 12:01:54

    The Gorilla Post System revolutionized the parking industry by using neodymium magnets to lock the rugged delineators, signposts, and bollards into a precise position. An ergonomic tool lifts the industrial- strength magnets to allow quick, temporary removal of the impact-resistant signposts and delineators. The systems base plate is ADA-compliant.

    Answer by: on 2018-02-09 12:01:54
  • Can you put a sign on all the Gorilla Post products?
    Question by: admin on 2018-02-09 12:01:54

    A plastic or plastic core 12” x 18” sign can be attached to all Gorilla Post tubes that are 4” or less in diameter. You can attach the sign directly to the tube used bolts or use one of the handy hardware options we have for signs. The 7” is a thinner material that does not support attaching a sign.

    Answer by: on 2018-02-09 12:01:54
  • Can the Gorilla plates hold up to snow removal?
    Question by: admin on 2018-02-09 12:01:54

    The Gorilla Post plate is slightly less than ¼” tall and the top portion of the plate is beveled at an angle. A snow plow can manage to impact the side of our plate as is also the case with raised yellow lane markers, raised blue location markets and raised ceramic dot lane indicators. Those markers and indicators are several times taller than our plates, however.

    Answer by: on 2018-02-09 12:01:54